Submission Instructions
To submit a paper to the SIGCOMM 2027, please use the paper submission site. You must submit your paper by February 2, 2027. This is a hard deadline and no extensions will be given. Before submitting, please read the rest of this document regarding paper formatting, registration, anonymity, and other important issues relevant to your submission.
All submissions must obey the following formatting requirements.
- Paper bodies (all content before references and appendices) must be no more than twelve (12) single-spaced pages, including figures and tables, followed by as many pages as necessary for references and optional appendices. Papers whose pre-reference content is longer than 12 pages will not be reviewed.
- Reviewers are not required to read any appendices or consider them in their review. Authors should thus ensure that the core paper is complete and self-contained. For example, if the appendix provides details of a proof or experiment, the body should summarize the key result. The claims in the main body of your paper cannot depend on experiments included in the appendices. Additional non-essential experiments that contribute to your paper may be included in the appendices, but program committee (PC) members are not obligated to read these appendices.
- If submitting to the experience-track, authors should indicate as such in the submission form and the paper title should begin with the “Experience:” prefix.
- Papers must be formatted for printing on Letter-sized (8.5" by 11") paper. Paper text blocks must follow ACM guidelines: double-column, with each column 9.25" by 3.33", 0.33" space between columns. Each column must use 10-point font or larger, and contain no more than 55 lines of text.
- It is your responsibility to ensure that your submission satisfies the above requirements. If you are using LaTeX, you may make use of this template for ACM conference proceedings. This template sets all necessary options for anonymous, double-blind submissions, including correct font size, margins, etc.
Your goal as an author is to produce a clearly readable submission within the above constraints. Authors are strongly discouraged from violating the formatting requirements with the aim of including additional material: the PC chairs can desk-reject any submissions that violate the formatting requirements. You can get a page-by-page report of your paper format using the same tool as the submission system using Banal, which can be invoked via a separate script.
After the submission deadline, we will use the same tool to check the conformance of papers. The format checking tool uses heuristics and can make mistakes. The PC chairs will manually inspect and possibly reject those papers with substantial format violations.
Please make sure that your submitted paper satisfies the following:
- Author block: You must list the submission number and the number of pages in your paper in the author block, e.g., "Paper #N, 12 pages body, 14 pages total", beneath your title. The submission site will provide the paper number when you first start the submission process. Per the anonymity guidelines, you must not list any author names.
- Abstract: You must provide an abstract, and it should be of no more than 200 words.
- Page numbering: You must number the pages.
- Format and fonts: You must submit papers in PDF (Portable Document Format) and ensure that they are compatible with Adobe Acrobat (English version). Other formats, including Postscript, will not be accepted. Avoid using non-standard fonts. The PC must be able to display and print your submission exactly as we receive it using only standard tools and printers, so we strongly suggest that you use only standard fonts that are embedded in the PDF file.
- Legibility: You should ensure that labels and symbols used in graphs and figures are legible, including the font sizes of tick marks, axis labels, legends, etc.
- File size: You should limit the file size to less than 15 MB. Contact the PC chairs if you have a file larger than 15 MB.
As part of the paper registration process, authors will be required to provide paper metadata which includes title and abstract, author names, author affiliations, author contact email addresses, topics matching the subject matter of the paper, track (research or experience), ethical concerns, and conflicts with PC members.
Please see ACM’s policy on conflict of interest for a longer discussion, but broadly we define conflict of interest with a PC member as follows:
- You are currently employed at the same institution, have been previously employed at the same institution within the last 12 months, or are going to begin employment at the same institution.
- You have a collaborative or professional relationship as follows:
- Past or present association as thesis advisor or advisee.
- Collaboration on a project, publication, or grant proposal within the past 2 years.
- Other conflicts as appropriate (e.g. marriage, family member, personal relationship, financial relationship, etc.). In this case, please mark “other” in HotCRP and send a note to the PC chairs, so they know the conflict is not spurious.
The PC chairs and members will review conflicts to ensure the integrity of the reviewing process, adding conflicts where necessary and sanity checking cases where conflicts do not appear justified. If there is no basis for PC conflicts provided by authors, those conflicts will be removed. Improperly identifying PC members as a conflict to avoid individual reviewers is unethical and may lead to your paper being desk-rejected. If you have concerns, please contact the PC chairs.
All submitted papers will be judged based on their quality and relevance through double-blind reviewing, where the identities of the authors are withheld from the reviewers. As an author, you are required to make a good-faith effort to preserve the anonymity of your submission, while at the same time allowing the reader to fully grasp the context of related past work, including your own. Common sense and careful writing will go a long way towards preserving anonymity. Minimally, please take the following steps when preparing your submission:
- Remove the names and affiliations of authors from the title page. For experience-track papers, it is acceptable (but not necessary) to reveal company or system names but papers cannot reveal author names.
- Remove identifying names and funding sources in any acknowledgments.
- Use care in naming your files. Source file names (e.g., "Alan-Turing.dvi") are often embedded in the final output as readily accessible comments.
- Do not embed pointers to external sources (e.g., public GitHub repositories) that leak author identity or affiliation.
- Use care in referring to your own previous or ongoing work. In most cases, do not omit references that are necessary for context (i.e., as related work). Instead, reference your past work in the third person, just as you would any other piece of related work by another author. The exception to this rule is a previous workshop paper on the same work, where the overlap would cause reviewers to question the novelty of the submitted work. For these cases, see the instructions below about paper novelty.
In addition to submitting an anonymized paper, double-blind reviewing requires that both authors and reviewers take care while reviewing is happening. Authors are welcome to release their paper in a non-peer-reviewed manner (such as a technical report by your institution or arXiv) and to give talks about their work (as work-in-progress). PC members and other reviewers are expected to not actively attempt to deanonymize papers. However, if there is a breach of double-blind reviewing, the author and/or reviewer should report it to the PC chairs.
Papers must follow basic precepts of ethical research and subscribe to community norms. These include respect for privacy, secure storage of sensitive data, voluntary and informed consent if human subjects are involved or other people are placed at risk, avoiding deceptive practices when not essential, beneficence (maximizing the benefits to an individual or to society while minimizing potential harm to an individual), and risk mitigation. Authors may want to consult the Menlo Report and the ACM ethics policy for further information on ethical principles, and they may find the Allman/Paxson paper in IMC 2007 helpful for a perspective on ethical data sharing.
All papers must indicate on the submission form if they raise any ethical issues, and provide the PC a description of these issues. If there are significant issues, the paper should clearly discuss these issues. The PC takes a broad view of what constitutes an ethical concern, and the PC chairs may reach out to authors during the review process if questions arise.
Many organizations have an ethics review process, sometimes called an Institutional Review Board (IRB). In many cases, IRB involvement is appropriate. IRB approval of research is an important factor (and should be mentioned), but the PC will independently evaluate the ethical soundness of the work just as they evaluate its technical soundness.
Authors should also consult ACM Publications Policies and the ACM Policy on Authorship, especially those around Authors; Plagiarism, Misrepresentation, and Falsification; Research Involving Human Subjects; Prior Publication and Simultaneous Submissions; Coercion and Abuse; and the use of Generative AI in papers. In particular, by submitting your article to an ACM Publication, you are hereby acknowledging that you and your co-authors are subject to all ACM Publications Policies. Alleged violations of this policy or any ACM Publications Policy may be investigated by ACM and might result in a full retraction of your paper, in addition to other potential penalties, as per ACM Publications Policy.
Under no circumstances should authors submit previously-published work, submit the same work simultaneously to multiple venues, or submit papers that plagiarize the work of other authors. SIGCOMM prohibits these practices and may take action against authors who have engaged in them. In some cases, the PC chairs may share information about submitted papers with other conference chairs and journal editors to ensure the integrity of papers under consideration. If the PC chairs discover a violation of these principles, sanctions may include, but are not limited to, contacting the institutions of the authors and publicizing the details of the case. Note that the ACM policy on simultaneous submissions does not consider technical reports (including arXiv) to be previous publication or concurrent submission.
Work that extends an author's previous workshop paper is welcome, but in their submitted SIGCOMM paper the author(s) should acknowledge their own previous workshop publication with an anonymous citation (e.g., "[7] anonymized workshop paper"). The submitted paper should explain the differences between the SIGCOMM submission and the prior workshop paper. In addition, the online submission form will require authors to submit the deanonymized citation and a short explanation of the differences from the prior workshop paper. The PC will review such extended versions of previously-published workshop papers in accordance with the SIGCOMM policy and the ACM Plagiarism Policy.
After acceptance, substantive changes to paper titles require approval by the PC chairs. Author lists should only be changed in exceptional circumstances, and only with the approval of the PC chairs (and all authors should qualify as authors under the ACM Policy on Authorship). Authors of accepted papers will also need to sign an ACM copyright-release form. All rejected papers will be treated as permanently confidential.